CNC Lathe

FANUC G90 OD/ID single turning canned cycle: the four-move square cutting cycle, straight and taper (R) format, modal structure, U/W/R sign directions, MDI flexibility and a step-by-step example program.

FANUC G76 multiple repetitive threading cycle: two-line format, P011060 code breakdown, thread-height and first-pass micron calculation, parameters 5130-5143, an M30x2 example program and the G97 requirement.

FANUC G75 multiple repetitive grooving cycle: two-line format, P/Q micron input (no decimal), radial pecking and Z sideways shift, OD/ID grooving, part-off, step-by-step algorithm, full example program and P/S065-067 alarm solutions.

FANUC G74 end-face peck drilling and grooving cycle: two-line format, two different R addresses, P/Q input units, parameters 5139/0722, G-code system difference and P/S062 alarm solutions.

FANUC G73 pattern repeating rough turning cycle: U/W total shift and R repeat count, the 0i-C/0i-D R1 difference, parameters 5135-5137, cast/forged parts, and P/S061-069 / PS0321-0327 alarm solutions.

FANUC G72 face rough turning cycle: two-line format, Type I/Type II, the difference between W depth of cut and W finishing allowance, parameters 5132-5146, and P/S061-069 / PS0322/0329 alarm solutions.

FANUC G71 rough turning cycle: two-line format, Type I vs Type II, 0i-C and 0i-D parameters (5102, 5103, 5132, 5145), P/S 062-068 alarm solutions and safe parameter changing.